[200WILLIAM-EC SP67851] Sensor Tubes for carpark

[matt at perkins.id.au]

Ok If you find it off drop me the photo and I will get it taken care of.

Matt.
On 3 Nov 2023 at 12:28 PM +1100, Paul Mooney <paulmooney at manxpm.com.au>, wrote:
> <IMG_2488.jpeg>
>
> Matt ,
> Can’t tell until after dark if they are working but this one is certainly not returned to correct uplight position.
> I will check illumination tonight.
>
> Regards
>
> P
>
> PSent from my iPhone
>
> > On 3 Nov 2023, at 12:11 pm, matt at perkins.id.au wrote:
> >
> > I was told they were repaired. Is that not the case ? I will get them back onto it if not.  Could you perhaps snap a picture of the non working one. If that's the case. As I was told yesterday they were all now operational.
> >
> > Matt.
> > On 3 Nov 2023 at 11:15 AM +1100, Paul Mooney <paulmooney at manxpm.com.au>, wrote:
> > > Hopefully the repair of the lights at the front of our building (MG  side) are still on the repair agenda.
> > >
> > > P
> > >
> > > Sent from my iPhone
> > >
> > > > On 3 Nov 2023, at 11:03 am, cscl at optusnet.com.au wrote:
> > > >
> > > > I agree Matt. As we discussed, it’s the best option. We change them as they die. Include the new sensor of course.
> > > > Cheers
> > > >
> > > > From: ec <ec-bounces at mailman.perkins.id.au> On Behalf Of matt at perkins.id.au
> > > > Sent: Friday, November 3, 2023 10:27 AM
> > > > To: Paul Mooney <paulmooney at manxpm.com.au>
> > > > Cc: ec at mailman.perkins.id.au
> > > > Subject: Re: [200WILLIAM-EC SP67851] Sensor Tubes for carpark
> > > >
> > > > We already had a quote for replacing with new fittings from a different electrician it was about double that price.  We could just go led tubes and leave them on all the time. There would be a power saving there. But right now the cleaner changes those tubes. I suggest we just  only get LED tubes going forward and the cleaner can change them as they die.
> > > >
> > > > Matt.
> > > > On 3 Nov 2023 at 10:12 AM +1100, Paul Mooney <paulmooney at manxpm.com.au>, wrote:
> > > >
> > > > > Matt,
> > > > > Seems excessive and perhaps there is a better solution. Can we put our problem to
> > > > > A couple of electrical companies to see if they have alternate solutions to our requirements?
> > > > > P
> > > > > Sent from my iPhone
> > > > >
> > > > >
> > > > > > quote_type
> > > > > > On 3 Nov 2023, at 9:57 am, matt at perkins.id.au wrote:
> > > > > >
> > > > > >
> > > > > > Hi All,
> > > > > > We have received the following costing for replacing the tubes in the car park with sensor tubes.
> > > > > >
> > > > > > --
> > > > > > JR Turks have advised that they can only supply Osram Ledvance sensor tubes. Minimum order is by carton and each carton comes with 25 tubes. Our cost to supply and install the tubes based upon the assumption that no re-wiring is required to the existing fittings would be $3875.00.
> > > > > >
> > > > > > Can we also recommend that the existing external driveway lights be replaced with new LED W/P fittings with inbuilt sensors, as the existing lights are in a poor condition. Our cost to do these works would be $1390.00
> > > > > >
> > > > > > --
> > > > > > I have been in these sorts of carparks before they do seem very dark. Please keep in mind that some people will become nervous walking around the car park as the light sort of light up as you get close to them. I know each lobby for example has sensor lights. As far as im aware every single one except mine (level 3) has been disabled because of residents complaints about safty. I would hate to shell out $4k and have people want it reversed. Perhaps an AGM question so to get a consensus ?
> > > > > >
> > > > > >
> > > > > >
> > > > > > Matt.
> > > > > > --
> > > > > > ec mailing list
> > > > > > ec at mailman.perkins.id.au
> > > > > > http://mailman.perkins.id.au/cgi-bin/mailman/listinfo/ec
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.perkins.id.au/pipermail/ec/attachments/20231103/1b7611c0/attachment.htm>