[200William-EC SP67851] Blackout this weekend and access control

[Craig Laforest]

Darren came by on Sunday to reboot the system and yes, surely now has the board for each elevator in hand.  Darren?

Darren did mention when I spoke with him that it was taking extra time for each floor selection to register.
Cheers,
Craig.

-----Original Message-----
From: ec-bounces at 200william.com <ec-bounces at 200william.com> On Behalf Of Matt Perkins -private
Sent: Tuesday, 9 November 2021 2:48 PM
To: Matthew Guy <matthew_guy at hotmail.com>
Cc: ec at 200william.com
Subject: Re: [200William-EC SP67851] Blackout this weekend and access control

Yes it was completely down on Sunday. I have not spoken to Darren but last time this happened it was because the power supply had failed and they were using a temporary one while it was on order. 

Darren can you confirm 
Matt



-- 
/* Matt Perkins
       Direct 1300 137 379     Spectrum Networks Ptd. Ltd.
       Office 1300 133 299     matt at spectrum.com.au
       Fax    1300 133 255     Level 6, 350 George Street Sydney 2000
      SIP 1300137379 at sip.spectrum.com.au
       Google Talk MattAPerkins at gmail.com
       PGP/GNUPG Public Key can be found at  http://pgp.mit.edu
*/

> On 9 Nov 2021, at 2:18 pm, Matthew Guy <matthew_guy at hotmail.com> wrote:
> 
> Good afternoon committee,
> 
> I understand there was a blackout in Woolloomooloo this weekend. Since then it appears the access control system for the fobs / swipes takes a very long time to register access. Has anyone else noticed a delay when swiping to a floor, common door or garage roller door? 
> 
> Matt G
> _______________________________________________
> EC mailing list
> EC at 200william.com
> http://200william.com/mailman/listinfo/ec

_______________________________________________
EC mailing list
EC at 200william.com
http://200william.com/mailman/listinfo/ec