[200William-EC SP67851] GYM LOUVRES (GYM MATTING)

[Brook Beves]

I'm not a gym junkie and I think my body is as good as Brad Pitt so I'll just go with the majority on this one.
Brook

Sent from my iPhone

On 22/07/2014, at 2:34 PM, Rob Willett <rob at robadda.com> wrote:

> Hi All, 
> 
> As someone who is not resident and therefore not using the gym, I am more than happy to vote with the majority as to the best solution. At this stage, it looks like floor mats as per George and the fan as per Matt ) 
> 
> Regards, ROB
> 
> 
> <ROB19732_RobEmailSig.jpg>
> 
> 
> 
> 
> On 21 Jul 2014, at 4:40 am, Ed Sainsbury <edsainsbury at ozemail.com.au> wrote:
> 
>> Dear EC,
>>  
>> My vote would be to change the flooring, as it is the main reason that the gym is unusable.
>> I would install a ceiling fan or wall mounted and covered fan for ventilation.
>>  
>> Regards,
>> Edward
>>                                         
>> From: George Ziri [mailto:georgeziri at bfms.com.au] 
>> Sent: Monday, July 21, 2014 7:19 AM
>> To: ec at 200william.com ec at 200william.com
>> Subject: Re: [200William-EC SP67851] GYM LOUVRES (GYM MATTING)
>>  
>> Good Morning All
>>  
>> I have researched a few places and found a supplier with non toxic matts.
>>  
>> http://www.gymdirect.com.au/shop/gym-flooring/rubber/rubber-gym-flooring-1m-x-1m/
>>  
>> $35 each. Approximately 20 pieces required. $700.00.
>> Labour to remove plus tipping fees. $370.00
>> Pick up and delivery and take to level 7 - $165.00
>> Installation $110.00
>>  
>> Total $1345.00
>>  
>> Please confirm that the product is satisfactory with approval to proceed.
>>  
>> George Ziri
>> OPERATIONS
>> Building Facilities Management Solutions
>> m: 0400 300 242
>> e: georgeziri at bfms.com.au  w:  www.bfms.com.au
>>  
>> <image001.gif>   
>> Safety | Integrity | Service | Excellence
>>  
>> From: Ed Sainsbury [mailto:edsainsbury at ozemail.com.au] 
>> Sent: Wednesday, 9 July 2014 6:29 AM
>> To: ec at 200william.com ec at 200william.com; George Ziri
>> Subject: GYM LOUVRES (NOW INDUSTRIAL FAN)
>>  
>> Hello all,
>>  
>> My point with the matts is that they are the main cause for making the gym un-useable. They are still leeching strong chemical odours after two years. Breathing deeply after, and through, a workout has made me feel ill and have a headache. Therefore I won't use the space, particularly for fear of what is in the chemicals that I would be breathing. 
>>  
>> Could we cheaply replace the existing matts for toxic free ones?
>>  
>> Regards,
>> Edward
>> 
>> Sent from my iPhone
>> 
>> On 7 Jul 2014, at 8:41 am, George Ziri <georgeziri at bfms.com.au> wrote:
>> 
>> Morning All,
>>  
>> That’s an idea but please consider the following:
>>  
>> -          The matting acts as noise absorption on impact of the machines.
>> -          If the matts are lifted the concrete will need to be resurfaced (grinded) to be aesthetically pleasing
>> -          The skirting boards will need to be removed and lowered down to the ground surface
>>  
>> Another way to provide cross ventilation is to install and industrial fan. With the industrial fan and the existing toilet exhaust fan, cross ventilation is created. 
>>  
>>  
>> http://www.signet.net.au/store/categories/industrial-fan/products/34968/industrial-wall-fan-726mm-30?gclid=CMKC3Z_fsb8CFQVvvAodTkMAww
>>  
>>  
>>  
>> George Ziri
>> OPERATIONS
>> Building Facilities Management Solutions
>> m: 0400 300 242
>> e: georgeziri at bfms.com.au  w:  www.bfms.com.au
>>  
>> <image001.gif>   
>> Safety | Integrity | Service | Excellence
>>  
>> From: ec-bounces at 200william.com [mailto:ec-bounces at 200william.com] On Behalf Of Ed Sainsbury
>> Sent: Friday, 4 July 2014 5:19 PM
>> To: ec at 200william.com ec at 200william.com
>> Subject: Re: [200William-EC SP67851] SP67851 - GYM LOUVRES
>>  
>> Hello,
>>  
>> If the louvers are too expensive, I would suggest removing the rubber mats, which are the cause of the smell. We can just use the A/C when necessary. 
>>  
>> Regards,
>> Edward
>> 
>> Sent from my iPhone
>> 
>> On 4 Jul 2014, at 9:53 am, Rob Willett <rob at robadda.com> wrote:
>> 
>> Hi all, 
>>  
>> Is this imperative? Seems a lot to spend for an area that will get minimal usage. However, I am happy to go with the majority. 
>>  
>> Regards, ROB
>>  
>>  
>> <ROB19732_RobEmailSig.jpg>
>>  
>> On 1 Jul 2014, at 10:23 pm, George Ziri <Georgeziri at bfms.com.au> wrote:
>> 
>> 
>> 
>> Good Afternoon All
>>  
>> Please find attached the quotation for the amount of $1700 plus gst for the louver system to allow cross ventilation.
>>  
>> Please let me know how you wish to proceed.
>>  
>> George Ziri
>> OPERATIONS
>> Building Facilities Management Solutions
>> m: 0400 300 242
>> e: georgeziri at bfms.com.au  w:  www.bfms.com.au
>>  
>> <image001.gif>   
>> Safety | Integrity | Service | Excellence
>>  
>> From: Info BFMS 
>> Sent: Wednesday, 2 July 2014 2:19 PM
>> To: George Ziri
>> Subject: Marquis Lourve Estimate #7 from Residential Revival
>>  
>> Boss
>>  
>> Please see attached quote for your review.
>>  
>> For any further queries, please feel free to contact our office.
>>  
>>  
>> William Oh
>> FACILITIES MANAGER
>> Building Facilities Management Solutions
>> m: 0488 388 313
>> e: info at bfms.com.au  w:  www.bfms.com.au
>>  
>> <image001.gif>
>> Safety | Integrity | Service | Excellence
>>  
>> From: Keep it Handy casey dinkha [mailto:keephandy at hotmail.com] 
>> Sent: Thursday, 26 June 2014 5:53 PM
>> To: Info BFMS
>> Cc: keephandy at hotmail.com
>> Subject: Estimate #7 from Residential Revival
>>  
>> Hi 
>> 
>> 
>> Thank you for your business.
>> 
>> 
>>  
>> 
>> 
>> <Estimate #7.pdf>
>>  
>> 
>> <stamp.htm>
>> 
>> 
>> Sent from my iPad
>> _______________________________________________
>> EC mailing list
>> EC at 200william.com
>> http://200william.com/mailman/listinfo/ec
>>  
>> 
>> 
>> _______________________________________________
>> EC mailing list
>> EC at 200william.com
>> http://200william.com/mailman/listinfo/ec
> 
> _______________________________________________
> EC mailing list
> EC at 200william.com
> http://200william.com/mailman/listinfo/ec
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://200william.com/mailman/private/ec/attachments/20140722/f9f2e353/attachment-0001.html