[200William-EC SP67851] GYM LOUVRES (GYM MATTING)

[Dave Petschack]

I am happy for the mats to be installed and also the ceiling/wall mounted industrial fan as per Georges earlier suggestion.

Thanks




On 21/07/2014, at 7:18 AM, George Ziri wrote:

> Good Morning All
>  
> I have researched a few places and found a supplier with non toxic matts.
>  
> http://www.gymdirect.com.au/shop/gym-flooring/rubber/rubber-gym-flooring-1m-x-1m/
>  
> $35 each. Approximately 20 pieces required. $700.00.
> Labour to remove plus tipping fees. $370.00
> Pick up and delivery and take to level 7 - $165.00
> Installation $110.00
>  
> Total $1345.00
>  
> Please confirm that the product is satisfactory with approval to proceed.
>  
> George Ziri
> OPERATIONS
> Building Facilities Management Solutions
> m: 0400 300 242
> e: georgeziri at bfms.com.au  w:  www.bfms.com.au
>  
> <image001.gif>   
> Safety | Integrity | Service | Excellence
>  
> From: Ed Sainsbury [mailto:edsainsbury at ozemail.com.au] 
> Sent: Wednesday, 9 July 2014 6:29 AM
> To: ec at 200william.com ec at 200william.com; George Ziri
> Subject: GYM LOUVRES (NOW INDUSTRIAL FAN)
>  
> Hello all,
>  
> My point with the matts is that they are the main cause for making the gym un-useable. They are still leeching strong chemical odours after two years. Breathing deeply after, and through, a workout has made me feel ill and have a headache. Therefore I won't use the space, particularly for fear of what is in the chemicals that I would be breathing. 
>  
> Could we cheaply replace the existing matts for toxic free ones?
>  
> Regards,
> Edward
> 
> Sent from my iPhone
> 
> On 7 Jul 2014, at 8:41 am, George Ziri <georgeziri at bfms.com.au> wrote:
> 
> Morning All,
>  
> That’s an idea but please consider the following:
>  
> -          The matting acts as noise absorption on impact of the machines.
> -          If the matts are lifted the concrete will need to be resurfaced (grinded) to be aesthetically pleasing
> -          The skirting boards will need to be removed and lowered down to the ground surface
>  
> Another way to provide cross ventilation is to install and industrial fan. With the industrial fan and the existing toilet exhaust fan, cross ventilation is created.
>  
>  
> http://www.signet.net.au/store/categories/industrial-fan/products/34968/industrial-wall-fan-726mm-30?gclid=CMKC3Z_fsb8CFQVvvAodTkMAww
>  
>  
>  
> George Ziri
> OPERATIONS
> Building Facilities Management Solutions
> m: 0400 300 242
> e: georgeziri at bfms.com.au  w:  www.bfms.com.au
>  
> <image001.gif>   
> Safety | Integrity | Service | Excellence
>  
> From: ec-bounces at 200william.com [mailto:ec-bounces at 200william.com] On Behalf Of Ed Sainsbury
> Sent: Friday, 4 July 2014 5:19 PM
> To: ec at 200william.com ec at 200william.com
> Subject: Re: [200William-EC SP67851] SP67851 - GYM LOUVRES
>  
> Hello,
>  
> If the louvers are too expensive, I would suggest removing the rubber mats, which are the cause of the smell. We can just use the A/C when necessary. 
>  
> Regards,
> Edward
> 
> Sent from my iPhone
> 
> On 4 Jul 2014, at 9:53 am, Rob Willett <rob at robadda.com> wrote:
> 
> Hi all, 
>  
> Is this imperative? Seems a lot to spend for an area that will get minimal usage. However, I am happy to go with the majority. 
>  
> Regards, ROB
>  
>  
> <ROB19732_RobEmailSig.jpg>
>  
> On 1 Jul 2014, at 10:23 pm, George Ziri <Georgeziri at bfms.com.au> wrote:
> 
> 
> 
> Good Afternoon All
>  
> Please find attached the quotation for the amount of $1700 plus gst for the louver system to allow cross ventilation.
>  
> Please let me know how you wish to proceed.
>  
> George Ziri
> OPERATIONS
> Building Facilities Management Solutions
> m: 0400 300 242
> e: georgeziri at bfms.com.au  w:  www.bfms.com.au
>  
> <image001.gif>   
> Safety | Integrity | Service | Excellence
>  
> From: Info BFMS 
> Sent: Wednesday, 2 July 2014 2:19 PM
> To: George Ziri
> Subject: Marquis Lourve Estimate #7 from Residential Revival
>  
> Boss
>  
> Please see attached quote for your review.
>  
> For any further queries, please feel free to contact our office.
>  
>  
> William Oh
> FACILITIES MANAGER
> Building Facilities Management Solutions
> m: 0488 388 313
> e: info at bfms.com.au  w:  www.bfms.com.au
>  
> <image001.gif>
> Safety | Integrity | Service | Excellence
>  
> From: Keep it Handy casey dinkha [mailto:keephandy at hotmail.com] 
> Sent: Thursday, 26 June 2014 5:53 PM
> To: Info BFMS
> Cc: keephandy at hotmail.com
> Subject: Estimate #7 from Residential Revival
>  
> Hi 
> 
> 
> Thank you for your business.
> 
> 
>  
> 
> 
> <Estimate #7.pdf>
>  
> 
> <stamp.htm>
> 
> 
> Sent from my iPad
> _______________________________________________
> EC mailing list
> EC at 200william.com
> http://200william.com/mailman/listinfo/ec
>  
> 
>  _______________________________________________
> EC mailing list
> EC at 200william.com
> http://200william.com/mailman/listinfo/ec

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://200william.com/mailman/private/ec/attachments/20140722/0b607b45/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ROB19732_DaveEmailSig.jpg
Type: image/jpeg
Size: 20664 bytes
Desc: not available
Url : http://200william.com/mailman/private/ec/attachments/20140722/0b607b45/attachment-0001.jpg